BIQU Hurakan Klipper 3D Printer

SKU: 1010000097

Regular price $379.00

● Out-of-the-box klipper printer.
● Enjoy wireless printing.
● Built-in microprobe.
● Partitioned hotbed design, power saving helper.
● Silent Printing.

American Express Apple Pay Mastercard PayPal Visa

Global Shipping    180-days Warranty    7-days Refund

Earn BQ Maker Coins to get cash discounts when buying this product.

Product Showcase

Hurakan 3D Printer

Out-of-the-Box Klipper Printer

Official cooperation

Remote printing

Adjustable heat bed

Automatic leveling

Material break detection


Dual-Tone Colors & Mecha Style

The dual-color design makes it unique and recognizable. Rigid lines fuse mecha elements to create a firm and cool hi-tech look.

Venting Grille

The venting grilles designed on the base and print head create a unique look while improving heat dissipation efficiency and reducing weight.

BTT Manta M4P+CB1

The latest main control board and core board, Manta M4P and CB1, enables Hurakan to run Klipper and also supports Marlin.

Klipper is Ready

Klipper, a huge leap in 3D printer firmware, has been pre-installed on Hurakan. So you don't have to deal with complicated installationprocedures but enjoy speed, precision, and convenience.

Enjoy Wireless Printing

Thanks to the built-in WiFi module, it is easier for users to print pause, check the printing progress, and adjust the temperatureof the nozzle on different terminal platforms(The control device and printer must be connected to the same WiFi network).

BIQU MicroProbe

The self-developed auto leveling sensor, mini-sized, 6g super lightweight, can use more than 10 million times, will add almost no weight to the extruder but offershigh precision leveling capability.

Quiet 3D Printing

Thanks to the TMC2209, an ultra-silent motor driver IC, the printingnoise can be significantly reduced.

Choose the Part to Heat

Switch the hotbed use area to adjust the hotbed power, which is more energy-saving and environmentally friendly.
●100W---for the central part of the bed (red light on)
●240W---for the whole bed (both blue and red lights on)

Filament Runout Sensor

With the filament runout sensor, the printer will automatically pause a print if filaments run out or break, saving time and filaments.

Light up Your Prints

A beautifully designed, fully customizable RGB light illuminates. Your prints in the dark, giving you full 16.8M color control via the web interface or the display screen.

Get Start Quickly

Thanks to the modular design, assembling the printer is fast and fun.

01 - Dual USB Ports
A USB flash drive can be used to print without an Internet connection, a USB plug and play camera can be connected for wireless monitoring.

02 - Power Supply Optional
Suitable for different voltages of 100-120V/200-240V.

03 - RJ45 Port
Offer a choice of a more reliable wired network connection.
*Note: This is a Gigabit Ethernet port.Currently, the CB1 installed on Hurakan only supports 100M Ethernet. If you want to experience Gigabit Ethernel, you can replace CB1 with CM4.

04 - SPI Interface
Designed for connecting an ADXL 345 accelerometer to realize Klipper's Resonance Compensation for a higher precision print.

Dimensions & Specs

3D Printer Name

BIQU Hurakan

3D Printer Dimensions


Print Head

1 PC

Nozzle Diameter

Standard 0.4mm



Slicing Software Compatibility

Cura/Repetier-Host/Simplify 3D...

Output Voltage


Heated Bed Power


Maximum Temperature of Nozzle


Suggested Printing Speed



PLA/ABS/PETG...(Any material with print temp lower than 260℃ including flexible filament with 95A stillness.)

Build Volume


Layer Thickness


Printing Accuracy


File Format


Printing Method

USB Drive/LAN Controlled

Rated Power


Max Temperature of Heated Bed


Default Speed Limit(Firmware)


Filament Runout Detection

Standard Feature

Rated Voltage

50/60 Hz

Packaging List

Note: Above are schematic diagrams of products, accessoriesuser interfaces, etc., for reference only. Please refer to the actual product because product updates may make the actual product slightly different from the schematic diagram.

Quick View Relavant Files

Upgradeable Hardware

ADXL 345

Learn more

H2 Direct Extruder Upgrade Kit

Learn more


Learn more

Dual Z Upgrade Kit

Learn more

BIQU Camera

Coming soon...

Print Process Display

Hurakan Original Accessories

2GT-6mm black belt 1m
6*24mm heat break
2*4mm teflon tube 1m
E3D brass nozzles V5/V6 1.75/0.4mm
Heating aluminum block silicone
PC4-M6 black pneumatic connectors
235*235*0.3mm PEI spring steel sheet
235X235*1.5mm soft magnetic stickers
POM wheel with dual bearing
40W 24V 60mm white heater cartridge PH2.54-2P
60mm thermistors PH1.5-2P
Filament break detection module
3010 fan with 60mm wire XH1.5-2P terminal
4010 fan with 60mm wire XH2.54-2P terminal
4010 turbo fan with 80mm wire XH1.5-2P terminal
3010 fan with 15cm wire XH2.54-2P terminal
BIGTREETECH Mini12864 V2.0
BIGTREETECH CB1 V2.2 (Hurakan)
BIGTREETECH TMC2209 V1.3 (Hurakan)
Purchase link----



Customer Reviews

Based on 7 reviews
Jamie Palmer
Best slinger

This printer is very underrated for what it is. Every time I need to print something I turn to the hurakan it’s very reliable and does what I ask of it. I have zero complaints and would recommend this for for anyone who wants to get into klipper. Biqu did an outstanding job with this machine.

Borja Gomez

La maquina esta muy bien, se monta muy facilmente e imprime con una calidad muy buena desde el minuto 0.

Linus Reinhardt

BIQU Hurakan DIY 3D Printer

Andrew Green
Great out of the box printer.

After discussing with my friends who already own printers, I was talked out of the creality 3 and into the biqu hurakan.

I have very little 3d printing experience, but after assembly, and going through the setup document, I was able to get it working very quickly.

My only issue is the stock bed adhesion wasn't great, and I would have prints fail because they would come undone from the bed, but that probably had more to do with my basement being cold. I was able to fix this with painters tape.

My only other issue is the GitHub documentation is a little spotty as some reviewers said there were files in there that are not anymore. Hopefully will be resolved.

Otherwise amazing printer.

Lorin Robbins
Interesting little bed slinger

First bed slinger I own. I have been using a massive delta for years and have had awesome prints. Basically slap a file in it and hit print.

I bought the Hurakan to learn kipper, and that’s been fun. I also bought the 7” touch screen and the accelerometer. After installing the screen a few new menus were available that were not on mainsail or the original screen. The screw leveling, and Z offset are much better with a screen. The web cam worked right away, but I’m still figuring out how to use it as Timelapse.

Updating the files could have been explained a little better but found resources on the web. The latest updates are a much better improvement. Mine won’t save config after a pid tune but I can add them manually and save. I’ve set up pressure advance, and run the accelerations, however these values do not change from stock.

The hotend might be good for little Billy but not for an experienced user. Nothing fits it off the shelf. I’ve experimented with a creality all metal spider designing my own mounts. I had to move the touch sensor down to get it lower than the nozzle, but that’s not a perfectly working option yet. I wish you had a plug and play all metal solution. You have plenty of great hotends in your catalog that this should be an option already. I’m on the fence with your direct drive extruder hotends as I don’t want to have to design the cooling and touch portions of the install. A bimetal hotend will run fine on the Bowden setup, as the printer can’t run much faster than 180mm. The H2 light with at least some cooling and touch stl’s would be nice for TPU or other materials.

I’m not sure adding the additional Z motor is something I need before a hotend so I haven’t bought into that.

All in all I gave it a 4. This isn’t a first printer for non experienced users unless you make a more thorough manual defining the klipper procedures. I’ve been using prusaslicer and made my own profile off of a different printer, and have had excellent results. This didn’t come out of the box like that. I had to do a lot of reading to get this to a state that I can now only drag and drop prints and go. Could I suggest a macros file in the GitHub that could be added for more macros on the machine?.

Don’t get me wrong you make quality machines, and I’m waiting for a Manta setup to come back in stock to update my Delta. It’s running a Lerdge board now and has been flawless but I want the ability to take advantage of the Klipper options.

Also please add any updates or improvements to the software or manual before your long New Year. I know the restrictions and lockdowns have been hard for everyone and I wish everyone


Thank you


Recently Viewed Products

Fast, Free shipping on orders over USD $49

180-Days Hassle-Free Warranty

We accept credit cards, PayPal, Apple Pay

Lifetime Customer Support
Live Chat or Email


Subscribe to get the latest special offers, free giveaways, and once-in-a-lifetime deals from BIQU.

*BIQU will never disclose your personal information to the public, and we have always complied with privacy policies.