BIGTREETECH Tango V1.0 Motherboard Upgrade on Rumba MPU / Optimized For 3D Printer

SKU: ZZB000185


Shipping calculated at checkout

Tango 1.0
Tango +A4988*6
Tango +DR8825*6
2022 09 06t114842

Global shipping

180-days warranty

7-days refund

What Are The Surprises?


Time is 11/01 - 11/11 PDT. The biggest discount event of this year.

3D Printer
Module Board
Upgrade Tool
Buy X Get Y


Time is 11/20 - 11/26 PDT. The biggest discount event of this year.

Driver Board
Buy X Get Y

Code is

Coming soon

Limited 300

Code is

Coming soon

Limited 100

Code is

Coming soon

Limited 100

Code is

Coming soon

Limited 50

Buy more than $1000, Get for Gifts

Over $1000, get a BL Touch

Over $1500, get a TFT35 E3 V3.0

Top 3 reward a MicroProbe

Wheel Game to Win Prizes

Free 3D printer, 90% off coupon...

Coming soon


The biggest deal of 3D printers | Join the printing contest to win prizes | Surprising group buy price

Brand Name:Ā BIQU
Product Name:Ā BIQU Tango V1.0
Type:Ā Motherboard
Input voltage:Ā 12V-24V
Condition:Ā New 100%
Lead Time:Ā In stock

  • Introduction

The electronic partĀ is the brain of a 3D printer, and all movements are controlledĀ by electronicĀ parts. The Tango1.0Ā board is R&D for a 3D Printer, which isĀ based on the AVR Processor ATMEGA2560Ā controller board. It supports three different color filaments, You can use a personal computerĀ with a USB cable to control the 3D printer

1. There are six stepper motors and five temperature sensor input interfaces;

2. LCD expansion interface, supports LCD screen and SD expansion interface, it can achieve offline printing;

3.UsingATMEGA2560 as the main control chip, with high-performance USB to UART chip CP2102, it is compatible with all related RAMPSĀ firmware;

4, Power input is 12-24V, the rated voltage of the hotbed is the same as the input voltage of the power supply, the voltage ofĀ the hot bed will be 12v if the voltage of the power supply is 12v, and the voltage ofĀ the hot bed will be 24v if the voltage of power supply is 24v.

5,.PWM DC output (heating rods, fans, etc.); 6 outputs (1 large current, 3 medium currents, 2 small currents), driven by high performance, low on-resistance MOS transistors, Ā LED as an indicatorĀ forĀ each output.


Notice :

AboutĀ Ā DR8825Ā  driver :The reference voltage Vref must be less than 1.25V.

We have white and yellow inserts for the main board, and we send them at random when delivered.(Just the color different .)

1.It is necessary to distinguish the positive and negative electrodes When connecting the power supply
2ļ¼ŒPlease pay attention to the type of driver you have purchased and install it correctly.
3ļ¼ŒThis 3D printer motherboard has a large current, high temperature characteristics, must pay attention to fire prevention, protection! Do not place this motherboard next to flammable objects;
4ļ¼ŒThe temperature of the circuit board will rise sharply when the hot bed is heated. If the printer is in a bad position of air circulation, the circuit board fuse will be automatically disconnected because of the high temperature, and the hot bed cannot be heated;
5ļ¼ŒIf you use mechanical switches as limited switches, just need to connect "signal S" and "ground-wire" terminals, and the "power supply +" terminal does not need to be connected.If it wrongly connect the mechanical stop switch to the circuit board. The power +ā€ and ā€œground ā€“ā€ terminals will burn the board.

Open source

The more details files you can download :Ā

TheĀ operate video can refer to check :





The biggest deal of 3D printers | Join the printing contest to win prizes | Surprising group buy price

Learn more