Hurakan 3D Printer
Out-of-the-Box Klipper Printer
Adjustable heat bed
Material break detection
Dual-Tone Colors & Mecha Style
The dual-color design makes it unique and recognizable. Rigid lines fuse mecha elements to create a firm and cool hi-tech look.
The venting grilles designed on the base and print head create a unique look while improving heat dissipation efficiency and reducing weight.
BTT Manta M4P+CB1
The latest main control board and core board, Manta M4P and CB1, enables Hurakan to run Klipper and also supports Marlin.
Klipper is Ready
Klipper, a huge leap in 3D printer firmware, has been pre-installed on Hurakan. So you don't have to deal with complicated installationprocedures but enjoy speed, precision, and convenience.
Enjoy Wireless Printing
Thanks to the built-in WiFi module, it is easier for users to print pause, check the printing progress, and adjust the temperatureof the nozzle on different terminal platforms(The control device and printer must be connected to the same WiFi network).
The self-developed auto leveling sensor, mini-sized, 6g super lightweight, can use more than 10 million times, will add almost no weight to the extruder but offershigh precision leveling capability.
Quiet 3D Printing
Thanks to the TMC2209, an ultra-silent motor driver IC, the printingnoise can be significantly reduced.
Choose the Part to Heat
Switch the hotbed use area to adjust the hotbed power, which is more energy-saving and environmentally friendly.
●100W---for the central part of the bed (red light on)
●240W---for the whole bed (both blue and red lights on)
Filament Runout Sensor
With the filament runout sensor, the printer will automatically pause a print if filaments run out or break, saving time and filaments.
Light up Your Prints
A beautifully designed, fully customizable RGB light illuminates. Your prints in the dark, giving you full 16.8M color control via the web interface or the display screen.
Get Start Quickly
Thanks to the modular design, assembling the printer is fast and fun.
01 - Dual USB Ports
A USB flash drive can be used to print without an Internet connection, a USB plug and play camera can be connected for wireless monitoring.
02 - Power Supply Optional
Suitable for different voltages of 100-120V/200-240V.
03 - RJ45 Port
Offer a choice of a more reliable wired network connection.
*Note: This is a Gigabit Ethernet port.Currently, the CB1 installed on Hurakan only supports 100M Ethernet. If you want to experience Gigabit Ethernel, you can replace CB1 with CM4.
04 - SPI Interface
Designed for connecting an ADXL 345 accelerometer to realize Klipper's Resonance Compensation for a higher precision print.
Dimensions & Specs
3D Printer Name
3D Printer Dimensions
Slicing Software Compatibility
Heated Bed Power
Maximum Temperature of Nozzle
Suggested Printing Speed
PLA/ABS/PETG...(Any material with print temp lower than 260℃ including flexible filament with 95A stillness.)
USB Drive/LAN Controlled
Max Temperature of Heated Bed
Default Speed Limit(Firmware)
Filament Runout Detection
Note: Above are schematic diagrams of products, accessoriesuser interfaces, etc., for reference only. Please refer to the actual product because product updates may make the actual product slightly different from the schematic diagram.
Quick View Relavant Files
Print Process Display
Hurakan Original Accessories
|2GT-6mm black belt 1m|
|6*24mm heat break|
|2*4mm teflon tube 1m|
|E3D brass nozzles V5/V6 1.75/0.4mm|
|Heating aluminum block silicone|
|PC4-M6 black pneumatic connectors|
|235*235*0.3mm PEI spring steel sheet|
|235X235*1.5mm soft magnetic stickers|
|POM wheel with dual bearing|
|40W 24V 60mm white heater cartridge PH2.54-2P|
|60mm thermistors PH1.5-2P|
|Filament break detection module|
|3010 fan with 60mm wire XH1.5-2P terminal|
|4010 fan with 60mm wire XH2.54-2P terminal|
|4010 turbo fan with 80mm wire XH1.5-2P terminal|
|3010 fan with 15cm wire XH2.54-2P terminal|
|BIGTREETECH Mini12864 V2.0|
|BIGTREETECH Manta M4P V2.2|
|BIGTREETECH CB1 V2.2 (Hurakan)|
|BIGTREETECH TMC2209 V1.3 (Hurakan)|