Product Description
H2 V2S REVO
Easy Nozzle Swaps with Fingers, joint research and development with E3D.
198g lightweight
Support 300℃
Dual gear 7:1
Labor-saving level
Revo Brass Nozzle
Change nozzles at room temperature using just your fingers. No complex tools, no hot tightening. Moreover, Revo nozzles are a factory sealed nozzle and heatbreak in one, so they're easy to fit and can't leak material when in use.
Revo HeaterCore
Heat up much faster than a typical heaterblock. It's designed to be much safer, too - a positive temperature coefficient (PTC) means power reduces as it gets hotter, reducing hazards in theevent of a thermal runaway.
Super Lightweight
H2 V2S Revo weighs only 198g, which contributes to less inertia and more accurate positioning.
Dual Gear Feeding
H2 V2S Revo features a dual-gear system to provide an exceptional pushing force, ensuring smooth feeding and giving snappy retractions.
Adjustabe Filament Loading Tension
Simply rotate the tension screw to accommodate different filaments, improving the printing success rate.
Labor-Saving Lever
The upgraded lever, a labor-saving and convenient design， eliminates the need to continuously hold the handle when inserting or removing filament.
Efficient Heat Dissipation
The lightweight and wear-resistant aluminum alloy housing, high thermal conductivity heat sinks, and fan realize a better heat dissipation.
Wide Compatibility
It can collaborate with BIQU B1, BIQU BX Ender-3, Voron 2.4, Voron V0, and Vzbot.
What's in the Box
It includes an extrduer, manual, colling fan, cables, screws and so on.
Dimensions & Specs
Extrusion Method
Dual Gear Extrusion
Maximum Printing Temperature
300℃
Weight
198g (including the fan.)
Maximum Extrusion Force
7.5kg (depending on the filament.)
Extrusion (based on the existing)
1800mm3/min (depending on the filament.)
E-step
932/mm at 16 microstep (Further calibration is recommended.)
Klipper Rotation Distance
3.433
Recommended Motor Current
800mA
Gear Ratio
7:1
Drive Gear Circumference
24.5mm
Filament Diameter and Tolerance
1.75±0.05mm
HeaterCore Power
40W
Voltage
24V
Thermistor Type
Semitec 104NT-4-R0H25H42G (NTC100K)
Quick View User Manual
Customer Reviews
Easy to install and changing nozzles is a breeze. Added this to a Vyper printer since the H2V2 on my BX worked so well, it prints really well now. Might upgrade my BX to a revo too.
Very high quality product delivered fast to UK from Asia warehouse. All taxes covered by original transaction.
BIQU products do tend to lack the box instructions for the novice customer. Connectors/Cabling supplied in the box may not suit the intended application so crimping of new connectors etc is involved there. Still a far star product!
Installed one of these on my very much non stock Tevo Tornado and what a beast it is. Prints are amazing. Easy nozzle changes, Eazy loading and changing of filaments and looks the part too.. Only fault I can give it is that it makes a clicking sound on retracts which from what I’ve read is that there is too much play in the drive gears from the bearings having too much play in the housing. It doesn’t seem to hinder the print at all but it is a bit annoying hearing it click all the time. Other than that. I love it.
Good morning,
I didn't have much time to devote to 3D printing but the object, BQ H V2S is already very beautiful as well as its 'packaging'. I'm finishing the adaptation, my XY core is little known, somewhat comparable to the "low-end" Voron, it's an economical choice. After its 'upgrade', in particular, the extruder, it should be top of the range. I'll keep you posted but I can't tell you more.best regards
OK
