BIGTREETECH BTT Octopus Pro V1.0/V1.1 For 3D Printer

$69.99 USD $47.99 USD Sale
1020000432

Shipping from: China
Type: Octopus Pro V1.1 with Chip H723
Size: Without drivers

NOTIFY ME WHEN IN STOCK

  • Global Fast Shipping
  • Free Shipping USD $49+
  • 180-days Warranty
  • Earn BQ Maker Coins to get cash discounts when buying this product
Shipping from: China
Type: Octopus Pro V1.1 with Chip H723
Size: Without drivers

BIGTREETECH Octopus Pro V1.0 Control Board/ Mainboard

Firmware link: Click here

【Main Control Chip】The main control board uses 32-bit ARM-level Cortex-M4 series STM32H723ZE / STM32F446ZE chip with a frequency of up to 168MHz and the flash is 1MB.

【Support 60V Input】Supports up to 8 3D printer motherboards with a maximum 60V stepper motor. The motor drive power supply supports up to 60V input (only for the motor drive power supply).

【6 Controllable Fans】Up to 6 controllable fans, two normally open fans, and both support power supply voltage, 12V, 5V options.

【Update Firmware: Klipper/Marlin/RRF】Supports firmware update via DFU mode. This is where the firmware is sent to the board directly from the PC and does not require a bootloader however this method is not recommended for novice users as discussed later in this document.

【Level conversion IC】Supports proximity sensor, jumper optional pull-up resistor, supports more models, supports BL Touch.

 

Customer Reviews

Based on 27 reviews
93%
(25)
7%
(2)
0%
(0)
0%
(0)
0%
(0)
M
Mrinal S.T.
An Outstanding 3D Printer Controller/Motherboard

I've had the pleasure of using the Octopus Pro v1.1 from BigTreeTech, and I must say, it's one of the best 3D printer controllers/motherboards I've encountered. As an engineer and electronics hobbyist, I can truly appreciate the thought and effort that went into this product.

First off, the feature set is impressive—BigTreeTech has packed this board with everything you could need for a custom or DIY 3D printer. The "Pro" in the name is fully justified, as it goes above and beyond what you'd expect from a standard controller.

The PCB design is nothing short of amazing. From an engineering standpoint, it’s clear that the team at BigTreeTech has done a remarkable job. The layout is clean, the components are well-organized, and the overall build quality is top-notch. The STM32H723 MCU used in this controller is particularly noteworthy. It’s a highly capable and powerful chip, making it an ideal choice for running along with Klipper firmware, which I've found to be perfect for pushing the limits of my 3D printer.

On a practical note, I received the product on time, and it arrived in perfect condition—nothing was damaged during shipping, which is always a concern with sensitive electronics.

I want to emphasize that this is not a paid review or paid promotion; these are purely my personal opinions based on my experience with the product. The Octopus Pro v1.1 has genuinely impressed me, and I highly recommend it to anyone looking for a reliable and feature-rich controller for their 3D printer.

Dear Customer,

Thank you very much for your high evaluation of Octopus Pro v1.1! We are very happy to know that you are satisfied with this product, especially as an engineer and electronics enthusiast, it means a lot to us to recognize our design and efforts.

We are always committed to providing users with high-quality and feature-rich products, and your feedback is the best affirmation of our work. We are also very pleased to see that you have a deep understanding of every detail of the product and have achieved ideal results during use.

We will continue to work hard to bring more excellent products to you and other users. If you have any questions or needs in the future, please feel free to contact us.

Thank you again for your support and trust!

Best wishes,
BIQU Customer Service Team

M
Michael S.
Board is great but documentation is rough to navigate

Once I got it all connected and flashed it is working awesome. Definitely download the pin out image and manual from GitHub.

H
Holger
Perfect

Perfect and fast board for core xy printer. Has as well lots of ports for additional upgrades. I love the separate power Selektion for each 2 pin output.

E
EVIL R.

BIGTREETECH BTT Octopus Pro V1.0/V1.1 For 3D Printer

R
Ronald c.
So far so good

I would wait to do a review but with all the other ducks I have, the main board will work as intended I'm sure, I have 2 skr minis e3 v3, both are the nest thing I ever got, I added the sfsv2 to both amd made it better, also the btt pis v1.2s just mad the printers rock, so when I add this board to one of them to handle triple z? It's going to really rock, thank biqu for what you all do