BIGTREETECH BTT Octopus Pro V1.0/V1.1 For 3D Printer

$69.99 USD $49.86 USD Sale

Shipping from: China
Type: Octopus Pro V1.1 with Chip H723
Size: Without drivers

Payment Icons
  • Global Fast Shipping
  • Free Shipping USD $49+
  • 180-days Warranty
  • Earn BQ Maker Coins to get cash discounts when buying this product
Shipping from: China
Type: Octopus Pro V1.1 with Chip H723
Size: Without drivers

BIGTREETECH Octopus Pro V1.0 Control Board/ Mainboard

Firmware link: Click here

【Main Control Chip】The main control board uses 32-bit ARM-level Cortex-M4 series STM32H723ZE / STM32F446ZE chip with a frequency of up to 168MHz and the flash is 1MB.

【Support 60V Input】Supports up to 8 3D printer motherboards with a maximum 60V stepper motor. The motor drive power supply supports up to 60V input (only for the motor drive power supply).

【6 Controllable Fans】Up to 6 controllable fans, two normally open fans, and both support power supply voltage, 12V, 5V options.

【Update Firmware: Klipper/Marlin/RRF】Supports firmware update via DFU mode. This is where the firmware is sent to the board directly from the PC and does not require a bootloader however this method is not recommended for novice users as discussed later in this document.

【Level conversion IC】Supports proximity sensor, jumper optional pull-up resistor, supports more models, supports BL Touch.


Customer Reviews

Based on 23 reviews
Ronald c.
So far so good

I would wait to do a review but with all the other ducks I have, the main board will work as intended I'm sure, I have 2 skr minis e3 v3, both are the nest thing I ever got, I added the sfsv2 to both amd made it better, also the btt pis v1.2s just mad the printers rock, so when I add this board to one of them to handle triple z? It's going to really rock, thank biqu for what you all do

Really nice board when used with Klipper

Running 256 microsteps on a V-core 3.1 at 1000mm/s and 10k acceleration runs flawlessly and as quiet as this machine will ever get.

The option to run high voltage steppers is very nice, and the fact you can easily run "normal" and HV steppers at the same time is exceptionally well thought out.

I haven't found any flaws as everything I'm using works completely without issue.

Great board

Lots of flexibility, powerful, runs klipper

Roland K.

BIGTREETECH BTT Octopus Pro V1.0/V1.1 For 3D Printer

Jan R.
Octopus pro

Zeer snel geleverd
Geweldig moederbord voor goede prijs maar nog niet getest omdat ik nog steeds met de printer aan het bouwen ben.