The pad 7 screen panel can be used to monitor printing progress.
BTT Klipper Pad 7 with black case.
It shows some of the interfaces on the back of pad7, as well as the locations where CB1 and CB1 heat sink are installed.
Well-performed function display on pad7 main page.
The screen will automatically adjust the brightness for a more user-friendly experience.
One of the highlights of Pad7 is that it provides touch feedback to prevent accidental touches.
The built-in CB1 core board can be disassembled and replaced with a different core board, such as Raspberry Pi Compute Module 4 (CM4).
It is a 7-inch Klipper Pad with wide view angle.
Replace the original CB1 with a CM4 and it can even be a mini computer.
The physical packaging picture of Pad 7 is shown, with BTT and Klipper stickers included.
Bigtreetech Pad 7 is not only a Klipper Pad.
The pad 7 screen panel can be used to monitor printing progress.
BTT Klipper Pad 7 with black case.
It shows some of the interfaces on the back of pad7, as well as the locations where CB1 and CB1 heat sink are installed.
Well-performed function display on pad7 main page.
The screen will automatically adjust the brightness for a more user-friendly experience.
One of the highlights of Pad7 is that it provides touch feedback to prevent accidental touches.
The built-in CB1 core board can be disassembled and replaced with a different core board, such as Raspberry Pi Compute Module 4 (CM4).
It is a 7-inch Klipper Pad with wide view angle.
Replace the original CB1 with a CM4 and it can even be a mini computer.
The physical packaging picture of Pad 7 is shown, with BTT and Klipper stickers included.
Bigtreetech Pad 7 is not only a Klipper Pad.

BIGTREETECH Pad 7 mit vorinstalliertem CB1 Core Board zum Ausführen von Klipper

$149.99 USD $89.00 USD Sale
1040000041

● Verbessern Sie die Druckqualität und -geschwindigkeit. Ausgestattet mit einem ADXL345-Beschleunigungsmesser trägt er dazu bei, die Druckgeschwindigkeit und -qualität deutlich zu verbessern und ermöglicht so einen schnelleren, präziseren und zuverlässigeren 3D-Druck.
● Adaptiver Lichtschirm zum Schutz der Augen. Die Helligkeit des Bildschirms variiert je nach Helligkeit der Umgebung, in der er sich befindet.
● DIY-freundliche, austauschbare integrierte CB1-Kernplatine. Wir stellen CB1 OS Image sowie Quellcode und andere Dateien zur Verfügung, damit Sie Code bearbeiten und auf Ihrem 3D-Drucker installieren können. Oder Sie können den CB1 durch CM4 ersetzen und ihn auf Linux aktualisieren, sodass er sogar ein Mini-Computer sein kann.
● Verschiedene Schnittstellen. Das Tablet unterstützt verschiedene Schnittstellen wie USB 2.0, Ethernet, CAN und SPI und wird mit einer 32-GB-Speicherkarte von SanDisk zur Speicherung geliefert.
● Breite Kompatibilität. Der Bildschirm selbst kann mit fast allen FDM-3D-Druckern kompatibel sein. Darüber hinaus ist dieser Bildschirm auch mit Motherboards der BIGTREETECH SKR-, Octopus-Serie, EBB-Toolboards usw. kompatibel.

Versand ab: China
Typ: Pad 7 (eingebautes CB1)

PayPal
Visa
Mastercard
American Express
Apple Pay
Google Pay
Union Pay
  • Global Fast Shipping
  • Free Shipping USD $45+
  • 180-days Warranty
  • Earn BQ Maker Coins to get cash discounts when buying this product

Customer Reviews

Based on 62 reviews
87%
(54)
13%
(8)
0%
(0)
0%
(0)
0%
(0)
l
luigi a.
Ottimo

Ho convertito la mia stampante 3d da Marlin a klipper e ho utilizzato questo pad touchscreen,lo trovo semplicemente fantastico 😍

User picture User picture
A
Adrian L.
Awesome addition to my N3P

I used the Ferral Engineers CFG files and his firmware.

B
Brian B.
Outstanding products!

The items purchased, and there were many, were exactly as described! Excellent customer service! Fast shipping! The items were packaged well and the manuals were well written and easy to follow! BTT will be my go to vender for my upcoming projects! Thanks! Keep up the great work!

J
José L.L.R.
Amazing control pad

This pad helped me yo improve my quality printing on ender 2 and ender 3. The pad work perfectly with others BTT boards like skr mini e3 v2 (in my case)

User picture
M
Maxime S.
Very good product

Very god product, the touch screen is well reactive. The only issue is the length of the power cord. it was a bit short for me

123

You may also like

Combine your style with these products

Product Description

Intro: The BIGTREETECH Pad 7 is a 7-inch IPS touchscreen tablet designed specifically for 3D printing enthusiasts. It comes with Klipper and KlipperScreen pre-installed and features a high-quality 7-inch IPS touchscreen. Also, it is not only a Klipper screen but also a mini-computer. The built-in CB1 Core Board can be detachable, you can replace it with CM4 and make it a mini-computer.

BIGTREETECH Pad 7

Not only a Klipper Pad

Klipper Pre-installed

7-inch IPS Touch Screen

1024*600
178° Viewing Angle

CB1/CM4 Compatibility

Rich Expansion Interface

Open Source

Strategic Partnership

X

The cooperation between KLIPPER and BIGTREETECH makes firmware for 3D printing enthusiasts more convenient to use and helps to further enhance the printing experience. BIGTREETECH is committed to establishing a completel 3D printing ecosystem, striving to bring more possibilities to the 3D printing industry and pushing the technologicall advancement of 3D printers to make 3D printers faster, better, and easier.

Klipper Pre-Installed

Enjoy improved print speeds and the convenience of a pre-installed Klipper firmware, allowing your 3D printer to operate more efficiently and complete projects faster than ever before, while also saving you time on setup and configuration.

Upgrade Your Printing Speed and Quality

With the BIGTREETECH ADXL345 Module and Klipper's Input Shaper, you can elevate your print quality to new heights and achieve the finest model quality possible.

Enjoy Wireless Printing

Pad 7 provides you the flexibility to control your 3D printer either through its intuitive touchscreen or by wirelessly connecting to your smartphone, tablet, or computer via Wi-Fi.

Powered by BIGTREETECH CB1 Core Board

Featuring a pre-installed CB1, the Allwinner H616 ARM Cortex-A53 processor (64-bit, 1.5GHz), provides a powerful computing platform for Klipper's smooth and seamless operation.
(Note: The CB1 can be detachable. If changing it to CB1 eMMC, it requires the screws and gaskets originally installed on CB1. If changing it to CM4, the CM4 replacement kit is already included in the package.)

Support running Klipper or Linux

Pad 7 is a KlipperScreen that can be used while printing, but it can also running Linux that can be used for daily entertainment, like watching videos or browsing the Internet.

Explore the Possibilities with Open Source

Pad 7 is open source, allowing developers and users to freely access and modify the source code to meet their personalized needs.

Compatibility & Expandability

Wide Compatibility

Thanks to open source, transferred from SD card or USB port, users can change firmware by edit the code. The Pad 7 can support Voron 2.4, VZbot, Ender-3, BIQU B1 SE Plus, etc.

*Note: At the moment the BIQU B1 is not fully supported by the Pad 7. If you plan to use the Pad 7 with a B1 then you may experience rare connectivity dropouts. Our engineers are working to resolve this. Other printers are unaffected.

Rich Connectivity

• USB-A *3
• TF Card Slot
• USB-C
• CAN bus
• RJ45
• SPI Interface
• 3.5mm Audio Jack

*Note: At the moment the BIQU B1 is not fully supported by the Pad 7. If you plan to use the Pad 7 with a B1 then you may experience rare connectivity dropouts. Our engineers are working to resolve this. Other printers are unaffected.

Improved Using Experience

7- inch IPS Touch Screen

Features a 7-inch IPS capacitive touch screen with a resolution of 1024 × 600 and a 60Hz refresh rate, providing high definition and rich colors.

• Resolution: 1024×600
• View angle: 178°
• Status indicator: RGB
• Volume adjustable via button: Speaker

Touch Feedback

Each tap is met with subtle vibrations, providing a tactile confirmation of your actions.

Auto Backlight Adjustment

Pad 7 automatically adjusts its screen brightness based on your surroundings, providing optimal visibility and reducing eye strain.

Durable and Reliable

Featuring a high-quality IPS screen combined with a meticulously designed shell structure, ensuring excellent impact resistance. Even in the event of accidental drops, it is less likely to shatter or get damaged.

Magnetic Holder

Adopting a magnetic suction bracket, it is more convenient to adsorb when using the bracket.

Dimensions & Specs

Size

7 inches

Resolution

1024×600

Refresh Rate

60Hz

Viewing Area

154.2×85.92

Viewing Angle

178°

Brightness

500 Cd/㎡

Input

DC12V 2A

Rated Power

7.3 W

Display Port

HDMI

Touch Port

USB-HID

PC Connection

Type-C (CM4 eMMC Writing OS)

Interface

USB 2.0×3, Ethernet, CAN, SPI, SoC-Card, 3.5mm Jack

Core Board: BIGTREETECH CB1 V2.2, 1GB, with a 32 GB Memory Card

What's in the box?

Quick View User Manual

User Manual

FAQ