Featuring a hollow-out design with a visible inner structure, H2 V2S Lite weighs only 175g, which contributes to less inertia and more accurate positioning.
At the same time, the airflow is also improved to give better heat dissipation.
Plus the heatsink and fan, H2 V2S Lite realizes a highly effective cooling.
Higher Flow. Faster Printing
Using a 0.6mm brass nozzle, and a longer heater block, H2 V2S Lite can output 45mm³/s to meet faster printing needs.
The upgraded lever, a labor-saving and convenient design, eliminates the need to continuously hold the handle when inserting or removing filament.
Quick Detach Heat Break
Now, with the quick detach design, you are allowed to remove the heat break by simply using a hex key,making maintaining much easier and more convenient.
Dual Gear Feeding
Featuring a dual-gear system to provide an exceptional pushing force, ensuring smooth feeding and giving snappy retractions.
Simply rotate the tension screw to accommodate different filaments, improving the printing success rate.
It can collaborate with BIQU B1, BIQU BX Ender-3, Voron 2.4, Voron V0, and Vzbot.
What's in the Box
It includes an extruder, user manual, cooling fan, cables, screws and so on.
Aluminium Alloy Case
Filament Drive Gear
More Mounting Holes
Details Make Perfect - Aluminium Alloy Case Crafted from aluminium alloy H2 V2S Lite is made for high durability,high strength,corrosion resistance, and above all, lightweight.
Filament Drive Gear - Made of tool steel plated with nano-coating to improve hardness wear resistance,corrosion resistance and provides longer life when printing abrasive materials.
Idler Arm - Made of 7075 T6 aluminum, with special blend high-performance anti-wear Mos2 grease to improve the quick release lever hap tics and enhance wear resistance.
Heat Break - H2 bi-metal(copper alloy + grade 5 titanium alloy). High performance thermal grease has been pre-applied to the heat break to increase thermal conductivity between the heat break and heat sink to improve cooling performance
More Mounting Holes - 4 screw mounting holes are available for installing an auto leveling sensor cooling tan.
(Note: The nozzle is custom-made and will be released in the near future.)
Dimensions & Specs
Dual Gear Extrusion
Maximum Printing Temperature
175g (including Heater Cartridge, Thermistor, and Fan)
Maximum Extrusion Force
7.5kg (depending on the filament)
Extrusion (based on the existing)
2700mm3/min (depending on the filaments)
932/mm at 16 microstep (Further calibration is recommended)
I recieved it today, and it's by far the sexiest hotend I've owned. I have not installed it yet. I see that the heatbreak is probably replaceable by the heatbreak of the standard h2. However, it would lose some of it's sexyness. So I am too waiting for the other nozzles. Please also create the strong nozzles (hardened steel or whatever).
BIQU H2 V2S Lite Extruder
No nozzles available!?
so I bought the biqu lite for its weight reduction. when installing I noticed the weird nozzle, than came to figure out that there are no alternatives to the stock nozzle! So I was wondering, is it possible to attach the revo hot end and nozzle to the biqu lite model?
Hello, we are sorry that the Revo nozzle doesn't match with the Lite extrude. We will shelf the customized Lite nozzle soon, please be patient. Thank you.
Beware, at this point, there is pretty much no aftermarket for the lite version. No nozzles, no silicone sock, the same flimsy garbage thermistor that comes in a starter hotend. You could've at least tapped it for a M3 so a screw in thermistor could be used. The heater just slides in with nothing to hold it in place. It seems to heat up extremely fast, and quickly shoots past the set temp by 30-40 degrees then backs down. Do yourself a favor and immediately throw away the gold screws that come with it. They are pretty, that's the only redeeming quality. Otherwise, they aren't work the bag they came in. I sheared off 2 of them and stripped the head out of another. All were finger tight. One required retapping the body of the extruder after snapping off cleanly with the surface....Thanks for the immediate breakage literally 5 minutes into owning it. The fan is on the louder side, imo. The metal frame and parts are nice and I feel better about spending money there. Fix a few issues and it has great potential.
Hi, thanks for your feedback! We will put related accessories on the shelves as soon as possible, please be patient. If you have any product problems, please feel free to contact us. Have a nice day!
BIQU H2 V2S Lite is a great extruder BUT
First impressions out of the box is that its an amazing product with a small footprint and super light weight.
For those that have never upgraded before be prepared to print parts to not only mount it but to cool the filament as it comes out of the nozzle. I did print without cooling and the results were not great. I have since added a fan to cool filament and its a lot better. Happy with my purchase :)
What's said about spares is for sure spot on and if I could take out 1/2 a star for this I would. BIQU needs to get the spares up on their site ASAP because if for any reason the nozzle gets damaged its just not available right now. I have contacted BIQU about spares right after receiving it and was told they will be available soon (when exactly?)
That being said I do love the product and will recommend it to those who are looking to step up their print quality and especially printing speed.
Hi, thanks for your likes! We will put related accessories on the shelves as soon as possible, please be patient. If you have any product problems, please feel free to contact us. Have a nice day!