BIGTREETECH Manta E3EZ V1.0 for Ender 3
โRunning Klipper or OctoPrint.
โBoard to board connection, compatible with CB1/CM4.
โPerfectly fit Ender 3.
โNew technology--work with EZ driver.
โRich interface - suitable for 3d printer DIY.
-
Free Shipping on Orders Over $59
-
30-Day Returns, 180-Day Warranty
-
Earn BQ Maker Coins on this purchase to get cash discounts.
About Warehouses
Default Shipping: China Warehouse
Unless otherwise specified, orders are shipped from our China warehouse, with worldwide delivery available. Estimated delivery time is 12โ20 business days, depending on your destination.
Alternative Warehouse Options
Selected products offer US or EU warehouse options as variants, subject to stock availability.
- US Warehouse: Available for delivery within the contiguous United States only. Alaska, Hawaii, Puerto Rico, and military addresses are excluded. Estimated delivery time: 5โ7 business days.
- EU Warehouse: Estimated delivery time: 5โ7 business days.
For more information, please refer to our Shipping Policy.
Product Description:
BIGTREETECH Manta E3EZ V1.0 Control Board โ Klipper Upgrade for Ender 3, Ender 3 Pro & Ender 5
The BTT Manta E3EZ V1.0 is a powerful drop-in 32-bit control board designed specifically for Creality Ender 3 series printers. Featuring the latest Manta + EZ technology, it combines board-to-board connection for CB1/CM4 with mistake-proof EZ driver slots, making it one of the easiest and most compact Klipper upgrades available.
Powered by a 32-bit 64MHz STM32G0B1RE MCU, this motherboard delivers smooth performance for both Klipper (with integrated CB1 or CM4) and Marlin firmware. It supports silent EZ drivers (EZ2209, EZ5160, etc.) in SPI or UART mode for ultra-quiet printing and reduced vibration.
Key Features:
- Direct drop-in replacement for stock Ender 3 motherboard (perfect mounting hole alignment)
- EZ driver slots โ no jumpers, no risk of reverse insertion
- Supports BIGTREETECH CB1 or CM4 for compact Klipper setup (no external Raspberry Pi needed)
- 5 motor channels: X, Y, Z (dual Z support), E0, E1
- Rich interfaces: HDMI, SPI, 40-pin GPIO, DSI, CSI, CAN FD, BLTouch, Filament sensor, RGB
- High current capacity: Heated bed up to 10A, hotend up to 5A
- Multiple safety protections and PWM fan control
- Supports Cartesian, CoreXY, Delta, and other kinematics
- Micro USB and LAN connectivity
Display Compatibility:
MANTA series motherboardsย support SPI and HDMI screens.
Files:
The Manta E3EZ is directly compatible with the Ender-3. Since we crammed so much into this board, we were unable to keep the size 100% compatible with other Ender machines and so minor, printable adapters are required. To check if your machine requires an adapter, see this link:
https://github.com/bigtreetech/Manta-E3EZ
ย
Product Description
Direct Upgrade for Ender-3
Drop-in replacement for Ender-3. The mounting holes are in the same location which means you just need to position it and screw it down.
5 Mistake Proof EZ Driver Slots
Select between SPI and UART in firmware. No need for jumpers. No risk of reverse insertion. Plug them in with the confidence of knowing that your drivers will start up without releasing the magic smoke.
High Performance You Can Rely On
32-bit, 64 MHz ARM Cortex-M0+ series STM32GOB1RE MCU. Don't want to use a CB1/CM4? No problem! Marlin is supported without one. Choose between Marlin or Klipper at will.
Supports Color Touchscreens
Onboard SPI and HDMI interfaces provide you with multiple display options to cater to your budget and up your Klipper game.
Enhanced Safety
Equipped with multiple safety features, the Manta E3EZ allows you to have peace of mind while producing the best prints.
What's in the box?
BIGTREETECH MANTA EะEZ x 1
DIY Crimp Terminal Set x 1
BTT Duck Toy x1
Thank You Card x 1
*About Manta Serials Board
Intro:
Born for Klipper. Save space and time by installing a CB1 or Raspberry Pi CM4 directly onto the motherboard to run Klipper or OctoPrint.
Highlights:
โข Designed with the same connector as Raspberry Pi to ensure a perfect connection with all versions of CM4, and CB1
โข Innovative integrated design, highly cost-effective,
โข 32-bit 64MHz ARM Cortex-M0+ series chip can run Marlin without CB1/CM4
โข 40 pins GPIO, offers a wide range of connectivity to meet your DIY needs
Intro:
Born for Klipper. Save space and time by installing a CB1 or Raspberry Pi CM4 directly onto the motherboard to run Klipper or OctoPrint.
Highlights:
โข Designed with the same connector as Raspberry Pi to ensure a perfect connection with all versions of CM4, and CB1
โข Innovative integrated design, highly cost-effective
โข 32-bit 64MHz ARM Cortex-M0+ series chip can run Marlin without CB1/CM4
โข 40 pins GPIO, offers a wide range of connectivity to meet your DIY needs
Compatibility & Extensibility
Dimensions & Specs
MCU
ARM Cortex-M0+ STM32G0B1RE 64MHz
Motherboard Power Supply Voltage
DC12V-DC24V
Motor Supply Voltage
DC12V-DC56V
Logic Voltage
DC 3.3V
Heater Connection
Heated Bed (HB), Heater Cartridge (HE0, HE1)
HB Port Max Current
10A Continuous, 11A Instantaneous
Heater Cartridge Max Current
5A Continuous, 6A Instantaneous
Fan Port
3 x PWM, 2 x Always On
Fan Port Max Current
1A Continuous, 1.5A Instantaneous
Overall Max Current(Heater Cartridge+Driver+Allย Fans)
<10A
Expansion Port
BLTouch, PS-ON, PWR-DET, Fil-DET, RGB, CAN FD, SPI
Motor Driver
Support EZ5160, EZ2209, EZ2208, EZ2225, EZ2226, EZ2130, EZ6609โฆ
Driver Mode
SPI, UART
Motor Socket
X, Y, Z (Dual Z Axes), E0, E1
5 Channels in Total
Thermistor
3ย x 100K NTC
Display
SPI Touchscreen, LCD Display
PC Connection
Micro USB
Interface
USB 2.0x2, LAN, DSI, CSI, SPI, 40Pin-GPIO, HDMI0, SOCCard, MCU-Card
Supported Kinematics
Cartesian, Delta, Kossel, Ultimaker, CoreXY
Quick View User Manual
The Manta E3EZ is directly compatible with the Ender-3. Since we crammed so much into this board, we were unable to keep the size 100% compatible with other Ender machines and so minor, printable adapters are required. To check if your machine requires an adapter, click here.
ย
