Manta Series Motherboards

BTT Manta boards are a series of 32-bit printer motherboards developed by the 3D printing team of Shenzhen Big Tree Technology Co., Ltd. While primarily intended for Klipper firmware, they can also run other popular distributions. Running Klipper is as simple as snapping a core board onto a Manta motherboard and using an automated installation tool to install the needed packages. The connection between the core board and the motherboard is made via an internal USB hub which saves you space and wiring complexity. Additionally, you can use a variety of compatible core boards such as the CB1 and CM4 which will help you to source a cost effective solution in spite of component shortages.

ONBOARD TMC2240/TMC2209

MCU: STM32GOB1CBT6

  • Split module design for fitting Voron StealthBurner Extruder
  • Multiple and optional expansion features
  • Elaborated the preset sockets for wiring and organizing cables more effortlessly      

Strain Relief Bracket for CANBus

Strain Relief Bracket for Type-C Cable

Mainboard side

EBB SB2240/SB2209 CAN

from $59

VORON Extruder Breakout Boards

ONBOARD TMC2240/TMC2209

MCU: STM32GOB1CBT6

  • Split module design for a snug fit inside the Voron Stealthburner Extruder
  • Plenty of ports for expansion and optional add-ons
  • Comes with an overmolded CAN bus cable for a single wire hotend connection. No more cabling nightmares

Strain Relief Bracket for CANBus

Strain Relief Bracket for Type-C Cable

Mainboard side

EBB SB2240/SB2209 CAN

from $59

Choose the Most Suitable Solution

For someone wants a standard motherboard but also want the Manta experience.

  • 10EZ sockets for better cooling and preventing reverse insertion
  • PT100 support with EZ31865
  • 48V driver support
  • Selectable voltage on the fans with 24V, 12V and 5V options
  • For someone wants a standard motherboard but also want the Manta experience.
  • CANBus support for easy toolboard wiring

Octopus Max EZ

from $79

EZ31865

from $8.99

MINI12864 V2.0

from $12.68

Pi4B

from $5.9

CB1

from $5.9

EZ Drivers

from $6.91

The Complete Solution for Your E3 Style Printer

For E3 Printers

  • 5A at 5V of pure power to drive all of your accessories
  • Drop in replacement for Ender Printers
  • CANBus support for easy toolboard wiring
  • 5 motor driver sockets providing room for dual extruders or dual Z
  • Innovative EZ sockets allow for replacable drivers and great cooling

MANTA E3 EZ

from $21.6

TFT35 SPI V2.1

from $19.68

EZ2209

from $6.91

For I3 Printers Solution

For I3 Printers

  • Selectable voltage on the fans with 24V, 12V and 5V 
  • Upgraded with eFuse protection which responds faster than a standard fuse and covers more fault modes. Protects the motherboard from short circuits, reverse polarity, over-current and many other fault modes.
  • Supports SPI and UART
  • Replaceable fuse for easy maintenance.
  • 40 pin GPIO headers and BTB design makes it perfectly compatible with either the CM4 or the BIGTREETECH CB1

MANTA M5P

from $59

TFT35 SPI V2.1

from $19.68

CB1

from $5.9

For Voron CoreXY Printers

For Voron CoreXY Printers

  • MCU: STM32G0B1CBT6
  • Onboard TMC2240/TMC2209
  • Onboard peripheral ICs offering convenience and functionality
  • More flexibility than anything else in the market
  • All sockets and connectors have been carefully chosen and positioned to ensure that your wiring will be simple and painless

EBB SB2240/2209 CAN V1.0

from $8.66

TFT35 SPI V2.1

from $19.68

CAN Cable

from $59

The BEST Motherboard Brand for 3D Printer -Best-selling|Easy to drive|SuperiorTrusted

What are you looking for?

Your cart