BIGTREETECH Pi 2

• Support DSI/CSI Ports.
The camera can be accessed through the CSI interface. Connected to the FPC port on the BTT PI TFT screen through the DSI interface, or to the BTT HDMI screen through the Micro HDMI interface. (Note: Pi 2 does not have an SPI interface. If you need to use an SPI screen, you need to connect it with IO2 CAN or EBB and U2C)

• More Flexible Power. 
Supports DC 12V-24V Power supply by the 3D printer directly; supports USB-C 5V power supply by a conventional USB-C power adapter.

• RK3566 Processor & Powerful Storage Functions.
Pi 2 not only has built-in RAM 2G, ROM 32G eMMC, but also supports SD card and M.2 solid-state drive expansion to meet your advanced needs for running Klipper on Debian storage software, documents, and surveillance videos.

• Gigabit Ethernet.
The Onboard RJ45 port, supports up to 1000Mbps network transmission for stronger, more stable network connectivity and faster transmission for your 3D printing data, enhancing the performance of running Klipper.

BIGTREETECH CB2

• Support DSI/CSI Ports.
The camera can be accessed through the CSI interface. Connected to the FPC port on the BTT PI TFT screen through the DSI interface, or to the BTT HDMI screen through the Micro HDMI interface. (Note: Pi 2 does not have an SPI interface. If you need to use an SPI screen, you need to connect it with IO2 CAN or EBB and U2C)

• Seamlessly Compatible with BTT Hardwares. 
Easily configure Klipper using the board-to-board connection method. CB2 supports Manta series board, Pad 5, PI4B.

• RK3566 Processor & Powerful Storage Functions.
CB2 has built-in RAM 2G, ROM 32G eMMC, which will meet your advanced needs for running Klipper on Debian storage software, documents, and surveillance videos.

• Gigabit Ethernet.
Support up to 1000Mbps network transmission for stronger, more stable network connectivity and faster transmission for your 3D printing data, enhancing the performance of running Klipper.

BIGTREETECH Eddy

• High-speed Leveling.
Completes bed leveling in just 20 seconds on a typical-size printer.

• High Accuracy.
Offers meticulous measurements with an accuracy of 0.0005mm.

• Feather-light & Compact.
Lightweight at 6g, reducing the influence of motion inertia, while its compact size ensures broad compatibility.

• Temperature Compensation.
 Integrates with Klipper's temperature compensation feature to boost leveling precision and avoid temperature drift. (Note: Currently, only Eddy V1.0 supports temperature compensation, not Eddy Coil.)

• Custom Casing.
Eddy's shell can help limit the installation height to avoid metal interference.

BIGTREETECH SKSM

• SBC System Image Protection
• Current Limiting Protection
• Direct Power Supply for BIGTREETECH Pi/Raspberry Pi

BIGTREETECH CEB

• Out-of-the-box Solution
• Multiple CAN Ports
• Security Guard
• Support DIY

BIGTREETECH HBB

• 7 Customizable Preset Keys
• Reserved Power Port for Knomi Series
• Blue Switch Mechanical Keys with RGB Backlight
• Pre-installed Klipper System