Product Description
An Innovative and Easier Way to Run Your Klipper
Manta M4P/M5P/M8P are born for Klipper running, they allow a direct installation of the BIGTREETECH CB1/Raspberry Pi CM4 to run the Linux system, then the Klipper.
Board-to-Board Connector
Designed with the same connector as Raspberry Pi, giving you a confident connection with all versions of CM4, and definitely, CB1 or CB1 eMMC. A screw-reinforced installation is available, too.
Compatibility & Extensibility
*Note:
•The HDMI, TFT35 SPI, and USB Camera can only work with CB1.
•The CSI/DSI port can only work with CM4.
Functions & Application
Manta M4P
✅ Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0BORE chip, more stable and faster.
✅ Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also avaliable.
✅ TPS5450-5A Power Chip The 5A output perfectly matches the power supply need of Raspberry Pi.
✅ It has rich expansion ports, can support various expansion modules, such as BL Touch, LCD screen, RGB light, auto shutdown, etc.
🌟The M4P & CB1 can be the best choice for Voron V0, Ender 3 etc.
Manta M5P
✅ Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0B1RET6 chip, more stable and faster.
✅ Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also avaliable.
✅ It has rich expansion ports, can support various expansion modules, such as BL Touch, LCD screen, RGB light, auto shutdown, etc.
✅ TPS5450-5A Power Chip The 5A output perfectly matches the power supply need of Raspberry Pi.
✅ Selectable CNC fan voltage, 5V/12V/24V.
✅ Added eFuse circuit protection. It will faster disconnected on overload, and automatically reset if the overload is gone, which will greatly reduce the motherboard burnout caused by short circuits or ignition.
✅ Reserved Can Bus port can be connected with EBB CAN, which will simplify the wiring and provide strong anti-interference ability.
🌟The M5P & CB1 can be the best choice for Voron V0, Ender 3, etc.
Manta M8P V1.1
✅ Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0B1VET6 chip, more stable and faster.
✅ Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also avaliable.
✅ It has rich expansion ports, can support various expansion modules, such as BL Touch, LCD screen, RGB light, auto shutdown, etc.
✅ TPS5450-5A Power Chip The 5A output perfectly matches the power supply need of Raspberry Pi.
✅ Selectable CNC fan voltage, 5V/12V/24V.
✅ Added eFuse circuit protection. It will faster disconnected on overload, and automatically reset if the overload is gone, which will greatly reduce the motherboard burnout caused by short circuits or ignition.
✅ Reserved Can Bus port can be connected with EBB CAN, which will simplify the wiring and provide strong anti-interference ability.
🌟The M8P V1.1 & CB1 can be the best choice for Voron 2.4, VzBot, etc.
Manta M8P V2.0
✅ Installed with 32-bit 550MHz ARM® Cortex-M0+ STM32H723ZET6 chip, the frequency is more faster.
✅ Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also avaliable.
✅ It has rich expansion ports, can support various expansion modules, such as BL Touch, LCD screen, RGB light, auto shutdown, etc.
✅ TPS5450-5A Power Chip The 5A output perfectly matches the power supply need of Raspberry Pi.
✅ Selectable CNC fan voltage, 5V/12V/24V.
✅ Added eFuse circuit protection. It will faster disconnected on overload, and automatically reset if the overload is gone, which will greatly reduce the motherboard burnout caused by short circuits or ignition.
✅ Reserved Can Bus port can be connected with EBB CAN, which will simplify the wiring and provide strong anti-interference ability.
Update:All new ID. Added I2C,5V Servo, Expanded IO, and TFT interface. Using 12V power solution. Optimized 5V power supply circuit.
🌟The M8P V2.0 & CB1 can be the best choice for Voron 2.4, VzBot, etc.
Dimensions & Specs
CB1/CB1 eMMC
CPU
ALLWINNER H616, Quad-core Cortex-A53 @1.5GHz
GPU
Mali G31 MP2, Support OpenGL3.2
RAM
512MB/1GB DDR3L SDRAM(The eMMC version has only 1GB available)
Storage Capacity Options:
(for eMMC Version Only)
16GB, 32GB
Input Voltage
5V±5%/2A
Output Voltage
3.3V±2%/100mA 1.8V±2%/100mA
WiFi
2.4G/802.11 b/g/n
Display
Compatible with HDMI2.0A Interface, Support 4K Displays
Connectivity
USB2.0 Interface, supports 100M Ethernet+ 100M WiFi
*The CB1/CB1 eMMC does not support DSI/CSI output at this time*
Manta M4P/M5P
Manta M8P V1.1
Manta M8P V2.0
MCU
STM32G0B0RE/STM32G0B1RET6
STM32G0B1VET6
STM32H723ZET6
Frequency
64 MHz
64 MHz
550 MHz
Driver Slot
4 / 5
8
8
eFuse
X / √
√
√
Fan Port
PWM Fan x 4
SoC Fan x 1/
PWM Fan x 2
SoC Fan x 1
Always on Fan x 1
2 pins PWM Fan x 5
4pins PWM Fan x 2
Always on Fan x 1
SoC Fan x 1
2 pins PWM Fan x 5
4pins PWM Fan x 2
Always on Fan x 1
SoC Fan x 1
Fan Voltage Selection
(24V,12V,5V)
X / √
√
√
Heater Cartridge Connector
1 / 2
4
4
Thermistor
100K NTC x 2 / 100K NTC x 3
100K NTC x 5
100K NTC x 5
USB
1 USB-OTG
3 USB-Host 2.0/
1 USB-OTG or UART to USB 3 USB-Host 2.0
1 USB-OTG or UART to USB
3 USB-Host 2.0
1 USB-OTG or UART to USB
3 USB-Host 2.0
HDMI
HDMI x 1 / Micro HDMI x 2
Micro HDMI x 2
Micro HDMI x 2
I2C Interface
X
X
√
CAN bus Interface
X / √
√
√
*For more information, please find the corresponding manual*
Quick View User Manual
